Fan & Power

A range of power cables to mix and match between the 3 and 4 pin fan connections. Also 5 and 7 volt converter cables.

Y Splitter Cable 3 pin

Allows two 3 pin devices to run off a single motherboard header.

10 cm long. 1 x female to 2 x male plug.

PC-02

Y Splitter Cable 4 pin

Allows two 4 pin devices to run off a single harness Molex connector.

10 cm long. 1 x female plug to 2 x male plugs.

PC-01

Adapter Cable 3 pin to 4 pin (with sensor lead)

Allows a 3 pin fan to be run off a 4 pin harness connector. Available with or without a sensor lead. The sensor lead connects to a motherboard header to provide fan speed information (if supported).

Picture shows the cable without the sensor lead.

PC-03/4

Adapter Cable 4 pin to 3 pin.

Allows a device with a 4 pin Molex connector to be connected to a 3 pin connector.

PC-13

Extension Cable 3 pin

Extends a 3 pin lead by 30 cm or 60 cm. 1 female, one male connector. 3 wire.

PC-05

Low Voltage Cable

Available in 5 (blue) or 7 (green) volt format. Allows a 3 pin fan to be run at a reduced voltage. Complete with a sensor lead and plug for connection to a motherboard header.

PC-06

Zalman Noiseless Connectors

Basically a resistance with 3 pin connectors. Designed to reduce the speed of the fan.

Available in two sizes, RC 35 for high wattage (large) fans and RC 100 for low wattage (small) fans.

PC-07/8

ATX Extension Cable

Extends the main ATX harness from the power supply by 200 mm. One male, one female connector.

PC-09
Weight: 55.00 gms

Cigar Lighter Cable

Permits a Cubid Case to be connected to a 12v Cigar Lighter socket. 6 foot long cable.

PC-10
Weight: 45.00 gms